Progress progress. I wanted to update you on Shane’s hand injury and our progress on the exterior siding and a current time-lapse photo of the Tiny House construction progress.
We worked on installing siding all day yesterday and it is looking really great. We like the galvanized z-bar flashing between sheets – a flat siding “rainscreen” type application that works really well on our tiny house. Like we mentioned before, we decided to use a readily available compressed cedar chip siding – TruWood I think it’s called. It’s light, easy to cut, easy to install, and thinner than real wood planks.
Here’s an overall photo of the siding installation process:
We also took the masking tape off of one window and our glossy white trim is looking very nice! (photo above.) We installed the front door, deciding to just use galvanized j-mold flashing around that in lieu of more bulky white trim. Here are a few close-ups of the siding:
the nail heads will be painted over, giving it a smooth, clean plank finish. The black painted piping visible in the photo above is our propane headed to the propane space heater and propane cooktop in the kitchen.
Here is a short video of construction progress so far:
Okay, so now if you get queasy easily you might not want to scroll down to the next images. As you may have heard already, Shane cut his knuckle on his right hand on some z-bar flashing Tuesday and we went to the ER to get it stitched up. the ER doc said the extensor tendon was lacerated and we needed to go to a hand surgeon. So, we went to the hand doc on Friday morning and the doctor saw how Shane could still lift his finger and said the tendon was fine, slapped a band-aid on it and told him to keep it straight for a month. Okaaaay…. but the ER doctor said the tendon was lacerated. Oh. The hand doc called the ER doc to get the story straight from him. It is lacerated, almost completely. So then the hand doc said he needed to operate on it. After a discussion about malpractice and liability it was agreed that the tendon couldn’t be lacerated completely through or the finger would be hanging limp, and not able to lift up, like it is. Remembering the ER doc could only see the laceration the flexed position we all agreed that the top of the tendon was cut, but not the bottom, and if kept in a splint, it would heal on it’s own, without surgery. (which just involves cutting the knuckle open and doing a fancy figure eight stitch through the two ends of the tendon). So, we paid $30 for a $2 splint and $165 for 20 minutes of the doctor’s time, and we were on our way!
Here’s the cut (and the bandaid the hand doc was going to send us away with first!)
We had a good laugh with the hand doc about the first splint Shane was given at the ER. I am trying to think of the right metaphor for the ER compared to the rest of the medical field…. maybe the ER’s splint was like this guy’s toaster:
http://www.thetoasterproject.org/ Which is as awesome story about the cost and difficulty of making a toaster from scratch and how we take technological advances for granted.
Okay, happy Sunday everyone! Tomorrow we’re headed to buy some surplus insulation and go to IKEA to look for a sink, lighting, etc?, and eat some ebelskivers! After that we’ll finish the exterior siding, insulate the house, install the roofing, and start on the interior finishes. Stay posted… we need to finish this month to meet our construction goal of two months total. We’ll see how badly Shane’s hand injury affects progress. Maybe I can step it up, get up earlier, and help out more?? While working and bringing home… some bacon. :)